YAMANI GC#320 Vitrified Bond

GC #320 Vitrified Bond — Green Silicon Carbide Coarse Whetstone

A professional coarse whetstone made with GC (Green Silicon Carbide), a hard and sharp abrasive known for its strong cutting ability and efficient material removal.

The #320 grit is ideal for the early stages of sharpening, including thinning, bevel and edge-profile correction, chip removal, and restoring blade geometry before progressing to medium and finishing stones.

• GC (Green Silicon Carbide) abrasive
• #320 coarse grit with strong cutting action
• Ideal for thinning and geometry correction
• Suitable for chip removal and blade restoration
• Excellent foundation for subsequent sharpening stages
• Size: 218 x 83 x 30mm
• Weight: 978g

How to Use a Vitrified Bond Whetstone.

1. Soak the whetstone in clean water before use.
2. Once sufficiently saturated, remove it from the water and begin sharpening.
3. Keep the surface wet by adding water as needed during use.
4. Rinse thoroughly with clean water after sharpening.
5. Allow the stone to dry naturally in a shaded, well-ventilated area.

Caution: Do not use hot water or dry the stone rapidly with direct sunlight, heaters, or other heat sources, as this may cause cracking or damage.